How to Apply glaze putty to a damaged car

To apply glaze putty to your car, after it has been damaged, you will need the following: 80 grit sandpaper, goggles, respiration mask, putty

You should sand the body filler, with 80-grit sandpaper. You should use feather edge the area with 150-grit. Make sure that you are wearing protective gear. When you are finished edging, apply putty to the area. Make sure that you apply the putty evenly. Try to apply a very thin coating, this will reduce the amount of sanding needed. Allow it to dry. Next, you will need to sand the area. Start with 150-grit. Then, finish with a 180-grit.